Shop S-21 & S-22, Samtel Zone, Bhiwadi 301019 pnsharmaheaterworks@gmail.com

Services

What we make and supply

The workshop deals in all types of industrial heaters and thermocouples, panels, furnaces, band heaters, ovens, blowers, glass wire, thermocouple wire, and general electrical and hardware items. Each job is made to the machine, not pulled from a fixed size list.

01 — Heaters

Industrial heaters

Heaters are the centre of the shop. A cartridge for a die, a mica or ceramic band for an extruder barrel, a strip on a platen, a finned element in a duct, an immersion heater in a tank, a coil on a nozzle, a cast block on a die, a porcelain heater for higher wattage, a glass tube, a silicon carbide element for a furnace, or an infrared emitter for a drying line.

Sheaths are chosen for the job: stainless steel, brass, copper, MS, incoloy and titanium. Low and high watt density are both made. If you have a burnt element, a drawing, or only the hole it came out of, that is enough to start.

  • Cartridge and D-type heaters for dies, moulds and sealing bars
  • Mica and ceramic band heaters, including blower jackets
  • Strip, finned strip, tubular and air heaters
  • Immersion heaters for water, oil and chemicals
  • Coil, coil-spring, mould, cast, porcelain, glass, infrared and silicon carbide heaters

02 — Sensors

Thermocouples

Temperature on a heater is only useful if it is measured. The shop supplies all types of thermocouples: the probes, bayonet and washer styles, mineral-insulated cable, ceramic sheaths and head-mounted sensors shown on the catalogue sheet as NI-25 to NI-47.

Order by the NI number if you know it. Otherwise describe the tip, the fitting and the length, and where it sits on the machine. The controller you already have will decide the sensor type.

03 — Panels

Control panels

A controlling panel switches the heaters and holds the setpoint. Panels are wired with meters, indicator lamps, switches and a temperature controller, sized to the number of heaters and the supply on the machine.

They are used on ovens, furnaces and process lines. Tell us how many heaters, the voltage, and whether you need one zone or several.

04 — Chambers

Furnaces and ovens

Besides loose elements, the shop supplies furnaces and ovens: a closed chamber, the heaters inside it, and a control face. They are used for heat treatment, drying, baking and any process that needs a steady hot space.

The useful details are the temperature you need and the inside size. The heater and the panel are then matched to that chamber.

05 — Air

Blowers

Finned heaters and ovens only work if the air moves. Centrifugal blowers are supplied for ducts and oven circulation. The same blower is used with a blower jacket, where a band heater has to heat a barrel and then let it cool.

06 — Fitting

Wire and hardware

Thermocouple wire joins a sensor to its instrument. Glass-fibre insulated wire is the lead that can sit near a hot heater. The shop also deals in the general electrical and hardware items that turn up while a heater is being fitted.

These do not need a separate page. Write the item and the quantity on the order, the same way you would a heater.

Place an order